Articles In Refereed Publications
2017
148. S. Rudinsky, A. S. Sanz and R. Gauvin (2017), “A novel quantum dynamical approach in electron microscopy combining wave-packet propagation with Bohmian trajectories”, Journal of Chemical Physics, 146, 10, 104702
147. N. Brodusch, F. Voisard, R. Gauvin (2017), “About the contrast of δ’precipitates in bulk Al–Cu–Li alloys in reflection mode with a field‐emission scanning electron microscope at low accelerating voltage”, Journal of Microscopy, DOI: 10.1111/jmi.12591
146. Z. Wang, R. Gauvin, G. P. Demopoulos (2017), “Nanostructural and photo-electrochemical properties of solution spin-coated Cu2ZnSnS4-TiO2 nanorod forest films with an improved photovoltaic performance”, Nanoscale, 9, Issue: 22, pp. 7650-7665
145. Y. Wang, R. Gauvin, M. Kong, C. Lin, Z. Liu and Y Zeng (2017), “Panoramic statistics on porosity and microstructural features of plasma sprayed Y 2 O 3-ZrO 2 thermal barrier coatings”, Surface and Coatings Technology”, 316, pp. 239-245
144. N. Brodusch and R. Gauvin (2017), “The qualitative f‐ratio method applied to electron channelling‐induced x‐ray imaging with an annular silicon drift detector in a scanning electron microscope in the transmission mode”, Journal of Microscopy, DOI: 10.1111/jmi.12565
143. H. C. Chiu, X. Lu, J. Zhou, L. Gu, J. Reid, R. Gauvin, K. Zaghib, G. P. Demopoulos (2017), “Annealing-regulated elimination of residual strain-induced structural relaxation for stable high-power Li4Ti5O12 nanosheet anodes”, Nano Energy, Volume 32, February 2017, Pp. 533–541
142. H. C. Chiu, X. Lu, J. Zhou, L. Gu, J. Reid, R. Gauvin, K. Zaghib and G. P. Demopoulos (2017), “Capacity Fade Mechanism of Li4Ti5O12 Nanosheet Anode”, Advanced Energy Materials, DOI: 10.1002/aenm.201601825
141. Y. Tian, A. Gontcharov, R. Gauvin & M. Brochu (2017), “Effect of heat treatment on microstructure evolution and mechanical properties of Inconel 625 with boron modification fabricated by gas tungsten arc deposition”, Mat. Sci. Eng. A, Vol. 684, pp. 275-283.
140. B. Wei, Y. Ji, R. Gauvin & X. Han (2017), “Strain Gradient Modulated Exciton Evolution and Emission in ZnO Fibers”, Scientific Reports, Vol. 7, AN: 40658
139. B. Akinrinlola, R. Gauvin, C. Blais, M. Brochu. (2017), “Thermal Stability of Cryomilled Al-Mg-Er Powders”, Journal of Nanomaterials.
138. I. Zeferino González, A. M. Valenzuela-Muñiz, C. Ben Youssef, M. Miki Yoshida, N. Brodusch, R. Gauvin, Y. Verde Gómez (2017), “Parametric study on the influence of synthesis variables in the properties of nitrogen-doped carbon nanotubes”, International Journal of Hydrogen Energy, 42, 51, pp. 30318-30329
137. A. Paolella, D. Laul, V. Timoshevskii, W. Zhu, S. Marras, G. Bertoni, A. S. Wahba, G. Girard, C. Gagnon, L. Rodrigue, B. Commarieu, A. Guerfi, R. Gauvin, M. L. Trudeau, A. Vijh, M. Armand, K. Zaghib (2017), "The Role of Metal Disulfides Interlayer in Li-S Batteries" The Journal of Physical Chemistry C, DOI: 10.1021/acs.jpc.
136. Y. Tian, B. Ouyang, A. Gontcharov, R. Gauvin, P. Lowden and M. Brochu (2017), "Microstructure evolution of Inconel 625 with 0.4 wt% boron modification during gas tungsten arc deposition", Journal of Alloys and Compounds. 694, pp. 429 - 438
135. Y. Zhang, N. Brodusch, S. Descartes, J. M. Shockley, R. Gauvin, R. R. Chromik (2017), "The Effect of Submicron Second-Phase Particles on the Rate of Grain Refinement in a Copper-Oxygen Alloy During Cold Spray", Journal of Thermal Spray Technology, 26, 7, pp. 1509-1516
134. S. M. Chentouf, T. Belhadj, N. Bombardier, N. Brodusch, R. Gauvin, M. Jahazi (2017), "Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy", The International Journal of Advanced Manufacturing Technology, 88, (9-12) pp. 2929-2937
2016
133. Jordens, C. Marion, R. Langlois, T. Grammatikopoulos, R. S. Sheridan, R. Gauvin and K. Waters (2016), “Beneficiation of the Nechalacho rare earth deposit. Part 2: Characterisation of products from gravity and magnetic separation”, Minerals Engineering, 99, pp. 96-110
132. H. C. Chiu, X. Lu, J. Zhou, L. Gu, J. Reid, R. Gauvin, K. Zaghib and G. P. Demopoulos (2016), “Capacity Fade Mechanism of Li4Ti5O12 Nanosheet Anode”, Advanced Energy Materials, 7, 1601825
131. F. Chevarin, K. Azari, D. Ziegler, R. Gauvin, M. Fafard, H. Alamdari (2016), “Substrate effect of coke particles on the structure and reactivity of coke/pitch mixtures in carbon anodes”, Fuel 183, pp. 123-131
130. M. Dorri, S. Turgeon, N. Brodusch, M. Cloutier, P. Chevallier, R. Gauvin and D. Mantovani (2016), “Characterization of Amorphous Oxide Nano-Thick Layers on 316L Stainless Steel by Electron Channeling Contrast Imaging and Electron Backscatter Diffraction”, Microscopy and Microanalysis, 22, (5), pp. 997-1006.
129. Yasin, F. Guo, M. J. Sussman, R. Gauvin and G. P. Demopoulos (2016), “Steady‐State, Scalable Production of Mesoporous Rutile and Brookite Particles and Their Use in Energy Conversion and Storage Cells”, ChemNanoMat, 2, (10), pp. 980-988
128. Y. Tian, A. Gontcharov, R. Gauvin, P. Lowden and M. Brochu (2016), “Effect of heat treatments on microstructure evolution and mechanical properties of blended nickel-based superalloys powders fabricated by laser powder deposition”, Materials Science and Engineering: A, 674, pp. 646-657
127. Y. Tian, R. Gauvin and M. Brochu (2016), “Microstructure Evolution and Rapid Solidification Behavior of Blended Nickel-Based Superalloy Powders Fabricated by Laser Powder Deposition”, Metallurgical and Materials Transactions A 47 (7), pp. 3771-3780
126. R. Gauvin and S. Rudznsky (2016), “A Universal Equation for Computing the Beam Broadening of Incidents Electrons in Thin Films”, Ultramicroscopy, Vol. 167, pp. 21-30
125. P. Hovington, V. Timoshevskii, S. Burgess, H. Demers, P. Statham, R. Gauvin and K. Zaghib (2016), "Can we detect Li K X-ray in lithium compounds using energy dispersive spectroscopy?", Scanning, early view (online on feb. 3, 2016)
124. M. Attarian Shandiz, M. J.-F. Guinel, R. Gauvin (2016), “Monte Carlo simulation of the fine structure of the energy-loss near-edge structure (ELNES)”, Microscopy & Microanalysis, Vol. 22(1), pp. 219-229
2015
123. E. J. Y. Ling, J. Said, N. Brodusch, R. Gauvin, P. Servio and A. M. Kietzig (2015), "Investigating and understanding the effects of multiple femtosecond laser scans on the surface topography of stainless steel 304 and titanium", Applied Surface Science, Vol. 353, pp. 512-521.
122. M. Attarian Shandiz, F. Salvat and R. Gauvin (2015), “Detailed Monte Carlo simulation of electron transport and electron energy loss spectra”, Scanning, Vol. 9999, pp. 1–17.
121. N. Brodusch, M. Yourdkhani, P. Hubert and R. Gauvin (2015), “Efficient cross-section preparation method for high-resolution imaging of hard polymer composites with a scanning electron microscope”, Journal of Microscopy, DOI: 10.1111/jmi.12273.
120. S. Kaboli, H. Demers, N. Brodusch and R. Gauvin (2015), “Rotation Contour Contrast Reconstruction using EBSD in a Scanning Electron Microscope”, Journal of Applied Crystallography, Vol. 48, pp. 776-785.
119. D. Goldbaum, R.R. Chromik, N. Brodusch and R. Gauvin, (2015). “Microstructure and Mechanical Properties of Ti Cold-Spray Splats Determined by Electron Channeling Contrast Imaging and Nanoindentation Mapping”. Microscopy and microanalysis, pp. 1-12, available on CJO2015
118. S. Kaboli and R. Gauvin (2015), "“On rotation axes analysis of deformed magnesium based on rotation contour contrast in a scanning electron microscope”, Ultramicroscopy, Vol. 154, pp. 42-48
117. X. Lu, H.J. Wei, H.C. Chui, , R. Gauvin, P. Hovington, A. Guerfi, K. Zaghib and G.P. Demopoulos (2015), "Rate-dependent phase transitions in Li2FeSiO4 cathode nanocrystals", Scientific Reports, Vol. 5, A.N. 8599
116. M.J. Sussman, N. Brodusch, R. Gauvin and G.P. Demopoulos, (2015), "Engineering 3-D Li-Ion Electrodes with Enhanced Charge Storage Properties Based on Solution-Processed and Sintered Anatase Nanocrystal-Carbon Mesoporous Structures", ACS Sustainable Chemistry and Engineering, Vol. 3, No. 2, pp. 334-339
115. N. Brodusch, K. Zaghib and R. Gauvin (2015), “Electron Backscatter Diffraction Applied to Lithium Sheets Prepared by Broad Ion Beam Milling”, Microscopy Research and Technique, 78, 1, pp. 30-39
114. N. Brodusch, H. Demers and R. Gauvin (2015), “Dark-Field Imaging Based on Post-Processed Electron Backscatter Diffraction Patterns of Bulk Crystalline Materials in a Scanning Electron Microscope”, Ultramicroscopy, 148, pp. 123-131.
2014
113. J.L. LeBoeuf, N. Brodusch, R. Gauvin and N.J. Quitoriano (2014), "Preferred orientations of laterally grown silicon films over amorphous substrates using the vapor-liquid-solid technique", Journal of Applied Physics, Vol. 116, No. 24, A.N. 244308
112. M. Attarian Shandiz and R. Gauvin (2014), “Density Functional and Theoretical Study of the Temperature and Pressure Dependency of the Plasmon Energy of Solids”, Journal of Applied Physics, Vol. 116, No. 16, 163501.
111. S. Rudinsky, R. Gauvin and M. Brochu (2014) “The Effects of Applied Current on 1D Inter Diffusion between Copper and Nickel in Spark Plasma Sintering”. Journal of Applied Physics, Vol. 116, No. 15, 154901
110. N. Brodusch, K. Zaghib and R. Gauvin (2014), “Electron Backscatter Diffraction Applied to Lithium Sheets Prepared by Broad Ion Beam Milling”, Microscopy Research and Technique, Vol. 78, No. 1, pp. 30-39
109. N. Brodusch, H. Demers and R. Gauvin (2014), “Dark-Field Imaging Based on Post-Processed Electron Backscatter Diffraction Patterns of Bulk Crystalline Materials in a Scanning Electron Microscope”, Ultramicroscopy, Vol. 148, pp. 123-131
108. Y. Y. Ding, M. Gallaugher, N. Brodusch, R. Gauvin and R. R. Chromik (2014), “Coating Induced Residual Stress in Non-Oriented Electrical Steel Laminations”, Journal of Materials Research, Vol. 29, No. 16, pp. 1737-1746.
107. N. Brodusch, H. Demers, M. Trudeau and R. Gauvin (2014), “High-resolution imaging and X-ray microanalysis in the FE-SEM”, Surface and Interface Analysis, Vol. 46, pp. 1286-1290
106. Y. Zhang, N. Brodusch, S. Descartes, R. R. Chromik and R. Gauvin (2014), “Microstructure Refinement of Cold-Sprayed Copper Investigated By Electron Channelling Contrast Imaging”, Microscopy and Microanalysis, Vol. 20 , No. 05, pp. 1499 – 1506
105. M. J.-F. Guinel, N. Brodusch, G. Sha, M. A. Shandiz, H. Demers, M. L. Trudeau, S. P. Ringer & R. Gauvin (2014), “Microscopy and Microanalysis of Complex Nanosized Strengthening Precipitates in New Generation Commercial Al-Cu-Li Alloys”, Journal of Microscopy, Vol. 255, No. 3, pp. 128 – 137
104. M. Gallaugher, N. Brodusch, R. Gauvin and R. Chromik (2014), “Magnetic domain structure and crystallographic orientation of electrical steels revealed by a forescatter detector and electron backscatter diffraction”, Ultramicroscopy, Vol. 42, pp. 40-49
103. N. Brodusch, K. Waters, H. Demers and R. Gauvin (2014), “Ionic Liquid-Based Observation Technique for Nonconductive Materials in the Scanning Electron Microscope: Application to the Characterization of a Rare Earth Ore”, Microscopy Research and Technique, Vol. 77, No. 3, pp. 225 - 235.
102. S. K. Das, N. Brodusch, R. Gauvin and I.-H. Jung (2014), “Grain boundary diffusion of Al in Mg”, Scripta Materialia, Vol. 80, pp. 41-44.
101. H. Qin, J.J. Jonas, H. Yu, N. Brodusch, R. Gauvin (2014), “Initiation and accommodation of primary twins in high-purity titanium”, Acta Materialia, Vol. 71, pp. 293-305.
2013
100. J. Wünsche, L. Cardenas, F. Rosei, F. Cicoira, R. Gauvin, C. F. O. Graeff, S. Poulin, A. Pezzella and C. Santato, (2013), “In Situ Formation of Dendrites in Eumelanin Thin Films between Gold Electrodes”, Advanced Functional Materials, Vol. 23, No. 45, pp. 5591–5598.
99. N. Brodusch, H. Demers and R. Gauvin (2013), “Dark-Field Imaging of Thin Specimens with a Forescatter Electron Detector at Low Accelerating Voltage”, Microscopy and Microanalysis, Vol. 19, No. 06, pp. 1688 – 1697.
98. S. Kaboli, D. Goldbaum, R. R. Chromik and R. Gauvin (2013), “Electron Channeling Contrast Imaging of Plastic Deformation Induced by Indentation in Polycrystalline Nickel”, Microscopy and Microanalysis. Vol. 19, No. 6, pp. 1620 – 1631.
97. A. A. Sorour, R. R. Chromik, R. Gauvin, I. H. Jung and M. Brochu (2013), “Understanding the solidification and microstructure evolution during CSC-MIG welding of Fe-Cr-B-based alloy”, Materials Characterization, Vol. 86, pp. 127-138.
96.M. J. Sussman, N. Brodusch, R. Gauvin, G. P. Demopoulos (2013), “Binder-Free Fabrication of Nanotitania/Carbon Li-ion Intercalation Electrodes”, Journal of the Electrochemical Society Vol. 160, No. 5, pp. A3100-A3107.
95. N. Brodusch, H. Demers, M. L. Trudeau, R. Gauvin (2013), “Acquisition Parameters Optimization of a T-EBSD Diffraction System in a FE-SEM”, Scanning, Vol. 35, No. 6, pp. 375-386.
94. M. Gallaugher, D. Peykov, N. Brodusch, R.R. Chromik, L. Rodrigue, M. L. Trudeau and R. Gauvin (2013), “Variations in nanomechanical properties of back-end Zr-2.5Nb pressure tube material”, Journal of Nuclear Materials, Vol. 442, No. 1-3, pp. 116-123.
93. D. W. Heard, R. Gauvin and M. Brochu (2013), “Non-equilibrium solute partitioning in a laser re-melted Al-Li-Cu alloy”, Acta Materialia, Vol. 61, No. 19, pp. 7432-7436.
92. M. J.-F., Guinel, N. Brodusch, Y. Verde-Gomez, B. Escobar-Morales and R. Gauvin (2013), “Multi-walled carbon nanotubes decorated by platinum catalyst nanoparticles-Examination and microanalysis using scanning and transmission electron microscopies”, Journal of Microscopy, Vol. 252, No. 1, pp. 49 – 57.
91. K. W. Malas, A. Jordens, M. Mirnezami, P. Chu, R. Gauvin and K. E. Waters (2013), “Surface characterisation of fergusonite”, Canadian Metallurgical Quarterly, Vol. 52, No. 3, pp. 278 – 284.
90. H. Demers, R. Gauvin, N. Brodusch and K. E. Waters (2013), “Characterisation of rare earth minerals with field emission scanning electron microscopy”, Canadian Metallurgical Quarterly, Vol. 52, No. 3, pp. 329 – 334.
89. J. Milligan, R. Gauvin and M. Brochu (2013), “Consolidation of cryomilled Al-Si using spark plasma sintering”, Philosophical Magazine, Vol. 93, No. 19, pp. 2445 – 2464.
88. N. Brodusch, S. Boisvert and R. Gauvin (2013), “Flat ion milling: a powerful tool for preparation of cross-sections of lead-silver alloys”, Microscopy, Vol. 62, No. 3, pp. 411-418.
87. J. M. Shockley, H. W. Strauss, R. R. Chromik, R. Gauvin, E. Irissou and J. G. Legoux (2013), “In situ tribometry of cold-sprayed Al-Al2O3 composite coatings”, Surface & Coatings Technology, Vol. 215, pp. 350 – 356.
86. H.-C. Chiu, N. Brodusch, R. Gauvin, A. Guerfi, K. Zaghib and G. P. Demopoulos (2013) “Aqueous Synthesized Nanostructured Li4Ti5O12 for High-Performance Lithium Ion Battery Anodes” Journal of Electrochemical Society Vol. 160, No. 5, pp. A3041-A3047.
85. N.P. Benehkohal, M. A. Gomez, R. Gauvin, G. P. Demopoulos (2013), “Enabling aqueous electrophoretic growth of adherent nanotitania mesoporous films via intrafilm cathodic deposition of hydrous zinc oxide”, Electrochimica Acta, Vol. 87, pp. 169-179.
84. N. Brodusch, H. Demers, R. Gauvin (2013), “Nanometers-Resolution Kikuchi Patterns with Transmission Electron Forward Scatter Diffraction in the SEM”, Journal of Microscopy, Vol. 250, No. 1, pp. 1–14.
83. H. Borkar, R. Gauvin, M. Pekguleryuz (2013), “Effect of extrusion temperature on texture evolution and recrystallization in extruded Mg–1% Mn and Mg–1% Mn–1.6%Sr alloys”, Journal of Alloys and Compounds, Vol. 555, pp. 219-224.
82. D. W. Heard, J. Boselli, R. Rioja, E. Marquis, R. Gauvin and M. Brochu (2013) “Interfacial Morphology Development during Rapid Solidification of a Al-Li-Cu Alloy”, Acta Materialla, Vol. 61, No. 5, pp. 1571–1580.
81. S. K. Das, Y. Kim, T. K. Ha, R. Gauvin and I.-H. Jung (2013), “Anisotropic Diffusion Behavior of Al in Mg: Diffusion Couple study using Mg Single Crystal”, Metallurgical and Materials Transaction A, Vol. 44A, No. 7, pp. 3420-3422.
80.S. K. Das, Y. Kim, T. K. Ha, R. Gauvin and I.-H. Jung (2013), “Anisotropic Diffusion Behavior of Al in Mg: Diffusion Couple study using Mg Single Crystal”, Metallurgical and Materials Transaction A, Vol. 44A, No. 6, pp. 2539-2547.
2012
79. R. Gauvin, N. Brodusch, P. Michaud (2012). "Determination of Diffusion Coefficients with Quantitative X-Ray Microanalysis at High - Spacial Resolution". Defect and Diffusion Forum. Vol - 323-325, pp. 61-67.
78. N. Brodusch, H. Demers, R. Gauvin (2012), “Dark-Field Imaging of Thin Samples with a Forescatter Electron Detector at Low Accelerating Voltage”, Microscopy and Microanalysis, Vol. 19, No. 6.
77.H. Borkar, R. Gauvin, M. Pekguleryuz, "Effect of extrusion temperature on texture evolution and recrystallization in extruded Mg–1% Mn and Mg–1% Mn–1.6%Sr alloys", Journal of Alloys and Compounds, Vol. 555, pp. 219-224.
76. N. Brodusch, H. Demers, R. Gauvin (2012), “Acquisition Parameters Optimization of a Transmission Electron Forward Scatter Diffraction System in a FE-SEM”, Scanning, Vol. 35, No 6, pp.375-386
75. D. W. Heard, J. Boselli, R. Rioja, E. Marquis, R. Gauvin and M. Brochu (2012) “Interfacial Morphology Development during Rapid Solidification of a Al-Li-Cu Alloy”, Acta Materialia, Vol. 61, No 5. pp. 1571-1580
74. N. Brodusch, S. Boisvert, R. Gauvin (2012), “Flat Ion Milling: A Powerful Tool for Cross-Section Preparation of Ultra-Soft Materials”, Journal of Electron Microscopy Techniques, Vol. 62, No.3, pp. 411-418
73. N. Brodush, M. L. Trudeau, P. Michaud, L. Rodrigue, J. Boselli, R. Gauvin (2012), “ Contribution of a New Generation FE-SEM in the Understanding of a 2099 Al-Li alloy”, Microscopy & Microanalysis, Vol. 18, No. 6, pp. 1393-1409.
72. D. Peykov, E. Martin, R. R. Chromik, R. Gauvin, M. L. Trudeau (2012), “Evaluation of Strain Rate Sensitivity by Constant Load Nano-Indentation”, Journal of Material Science, Vol. 47, No. 20, pp. 7189 - 7200.
71. R. Gauvin (2012), “What remains to be done to allow Quantitative X-Ray Microanalysis to become a Characterization Technique used with every EDS Spectra Acquired?”, Invited Paper, Microscopy & Microanalysis, Vol. 18, No. 5, pp. 915 - 940.
70. P. Vespa, P. T. Pinard, R. Gauvin, M. Brochu (2012), “Analysis of WC/Ni-Based Coatings Deposited by Controlled Short-Circuit MIG Welding”, Journal of Materials Engineering and Performances, Vol. 21, No. 6, pp. 865-876.
69. M. Celikin, A. Kaya, R. Gauvin, M. Pekguleryuz (2012),“Effects of Manganese on the Microstructure and Dynamic Precipitation in Creep Resistant Cast Mg-Ce-Mn alloys”, Scripta Materialia, Vol. 66, No. 10. pp. 737-740.
68. B. Akinrinlola, R. Gauvin, M. Brochu (2012), “Improving Mechanical Reliability of Cryomilled Al-Mg Alloy using a Two-Stage Spark Plasma Sintering Cycle”, Scripta Materialia, Vol. 66, No. 7, pp. 455 - 458.
67. C. Probst, H. Demers, R. Gauvin (2012),“Spatial Resolution Optimization of Electrons Images Using Monte Carlo Simulation”, Microscopy & Microanalysis, Vol. 18, No. 3, pp. 628 – 637.
66. R. Gauvin, P. Michaud, N. Brodusch (2012), “Determination of Diffusion Coefficients with Quantitative X- Ray Microanalysis at High - Spatial Resolution”, Defect and Diffusion Forum, Vol. 323-325, pp. 61-67.
2011
65. D. Poirier and R. Gauvin (2011), “ X-Ray Microanalysis of Porous Materials”, Scanning, Vol. 33, No. 3, pp. 126 – 134.
64. D. Poirier, J.G. Legoux, R.A.L. Drew and R. Gauvin (2011), “Consolidation of Al(2)O(3)/Al Nanocomposite Powder by Cold Spray”, Journal of Thermal Spray Technology, Vol. 20, No. 1-2, pp. 275-284.
62. C. Charbonneau, R. Gauvin, and G. P. Demopoulos (2011), "Aqueous Solution Synthesis of Crystalline Anatase Nanocolloids for the Fabrication of DSC Photoanodes", Journal of the Electrochemical Society, Vol. 158, No. 3, pp. 224-231.
61. P. Tetreault-Pinnard, P. Hovington, M. Lagacé, D. Thibault and R. Gauvin (2011), "A new analysis engine for processing electron backscatter patterns: EBSD-Image", Microscopy & Microanalysis, Vol. 17, No. 3, pp. 147-165.
2010
60. P. Horny, E. Lifshin, H. Campbell and R. Gauvin (2010), “Development of a New Quantitative X-Ray Microanalysis Method for Electron Microscopy”, Microscopy & Microanalysis, Vol. 16, No. 6, pp. 821-830.
59. D. Poirier, R. A. L. Drew, M. Trudeau and R. Gauvin (2010), "Fabrication and properties of mechanically milled alumina/aluminum nanocomposites", Materials Science and Engineering A, Vol. 527, No. 29-30, pp. 7605-7614.
58. C. Charbonneau, K. E. Lee, G. B. Shan, M. A. Gomez, R. Gauvin and G. P. Demopoulos (2010), “Preparation and DSSC Performance of Mesoporous Film Photoanodes Based on Aqueous-synthesized Anatase Nanocrystallites”, Electrochemical and Solid State Letters, Vol. 13, No. 8, pp. 257-260 .
2009
57. C. Charbonneau, R. Gauvin, G.P. Demopoulos (2009), “Nucleation and Growth of Self-Assembled Nanofibre-Structured Rutile (TiO2) Particles via Controlled Forced Hydrolysis of Titanium Tetrachloride Solution”, Journal of Crystal Growth, Vol. 132, No. 1, pp. 86-94.
56. D. Poirier, R. Gauvin, R.A.L. Drew (2009), “Structural Characterization of a Mechanically Milled Carbon Nanotube/Aluminum Mixture”, Composites, Part. A, Vol. 40, No. 9, pp. 1482 – 1489.
55. K. E. Lee, C. Charboneau, G.B. Shan, G.P. Demopoulos and R. Gauvin (2009), “Nanocrystalline TiO2 Thin Film Electrodes for Dye-Sensitized Solar Cell Applications”, Journal of Metals, Vol. 61, No. 4, pp. 52-57.
54. P. Hovington, P. Tetreault-Pinnard, M. Lagacé, L. Rodrigue, M. Trudeau, R. Gauvin (2009), “Towards a More Comprehensive Microstructural Analysis of Zr-2.5Nb Pressure Tubing using Image Analysis and EBSD”, Journal of Nuclear Materials, Vol. 393, No. 1, pp. 162–174.
2008
53. P. Jonnard, K. Le Guen, J.-F. LeBerre and R. Gauvin (2008), “Characterization of Al-Mg Alloys from their Electronic Structure”, Microscopy & Microanalysis, Vol. 15, No. 1, pp. 36-45.
52. D. Wang, J. J. Tunney, James J., X. Du, M. Post and R. Gauvin (2008), “Thermal stability of SrFeO3/Al2O3 thin films: Transmission electron microscopy study and conductometric sensing response”, Journal of applied Physics, Vol. 104, No. 2, A.N. 023530, 12 pages.
51. J-F Le Berre, R. Gauvin and G.P. Demopoulos (2008), “A Study of the Crystallization Kinetics of Scorodite via the Transformation of Poorly-Crystalline Ferric arsenate in Weakly Acidic Solution”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 135, No. 1-3, pp. 117-129.
2007
50. J-F Le Berre, H. Demers, G.P. Demopoulos and R. Gauvin (2007), “Examples of Charging Effects on the Spectral Quality of X-ray Microanalysis on a Glass Sample Using the Variable Pressure Scanning Electron Microscope”, Scanning, 29 (6), pp. 270-279.
49. J-F Le Berre, R. Gauvin and G.P. Demopoulos (2007), “Characterization of Poorly-Crystalline Ferric Arsenate Precipitated from Equimolar Fe (III) – As (V) Solutions in the pH Range 2 to 8”, Metallurgical and Materials Transactions B, 38 (5), pp. 751-762.
48. J-F Le Berre, R. Gauvin and G.P. Demopoulos (2007), “Synthesis, Structure and Stability of Gallium Arsenate Dihydrate, Indium Arsenate Dihydrate and Lanthanum Arsenate”, Industrial and Engineering Chemistry Research, 46 (24), pp. 7875-7882.
47. J.-F. Le Berre, G. P. Demopoulos and R. Gauvin (2007), “Skirting: A Limitation for the Performance of X-ray Microanalysis in the Variable Pressure or Environmental Scanning electron Microscope”, Scanning, 29, pp.114-122.
46. J-F Le Berre, T.C. Cheng, R. Gauvin and G.P. Demopoulos (2007), “Hydrothermal Synthesis and Stability Evaluation of Iron (III)-Aluminum (III) Arsenate Solid Solutions”, Metallurgical and Materials Transactions B, 38, pp.159-166.
45. J-F Le Berre, T.C. Cheng, R. Gauvin and G.P. Demopoulos (2007), “Hydrothermal Synthesis and Stability Evaluation of Mansfieldite in Comparison to Scorodite”, Canadian Metallurgical Quarterly, 46, pp. 1-10.
44. D. Drouin, A. R. Couture, D. Joly, X. Tastet, V. Aimez and R. Gauvin (2007), “CASINO – V2.42 –A Fast and Easy to Use Modeling Tool for Scanning Electron Microscopy and Microanalysis Users”, Scanning, 29 (3), pp. 92-101.
43. C. Probst, R.A.L. Drew and R. Gauvin (2007), “Imaging of Carbon Nanotubes with Tin-Palladium Particles Using STEM Detector in a FE-SEM”, Micron, 38 (4), pp. 402 - 408.
42. R. Gauvin (2007), “A Universal Equation for the Emission Range of X-Rays from Bulk Specimens”, Microscopy & Microanalysis, 13 (5), pp 354-357.
41. D. Wang, J. J. Tunney, X. Du, M. L. Post and R. Gauvin (2007), “Transmission Electron Microscopy Investigation of Interfacial Reactions between SrFeO3 Thin Films and Silicon Substrates”, Journal of Materials Research, 22 (1), pp. 76 – 88.
2006
40. R. Gauvin, E. Lifshin, H. Demers, P. Horny and H. Campbell (2006), “Win X-ray: A New Monte Carlo Program that Computes X-ray Spectra Obtained with a Scanning Electron Microscope”, Microscopy & Microanalysis, 12, pp. 49 - 64.
39. R. Gauvin (2006), “Quantitative X-Ray Microanalysis of Heterogeneous Materials using Monte Carlo Simulations”, Microchimica Acta. Vol. 154 (3), pp. 172 - 184.
38. R. Gauvin, K. Robertson, P. Horny, A.M .Elwazri and S. Yue (2006), “Materials Characterization Using High-Resolution SEM and X-Ray Microanalysis”, JOM, March issue, pp. 20 - 26.
37. K. Robertson, R. Gauvin, S.R. Rao and J. Finch (2006), “Identifying Refractory in Nickel in Acid Mine Drainage Lime Treatment Sludge”, Canadian Metallurgical Quarterly, 45 (1), pp. 95 - 101.
36. R. Varano, A.M. Elwazri, F. Siciliano, S. Yue and R. Gauvin (2006), “FE-SEM Study of Fine Nb Precipitates in Carbon Extraction Replicas”, Materials Science Forum, 500-501, pp. 663 - 667.